black and white bed linen

Link-LR

LoRa traffic analyzer and generator

Test your LoRa link in real conditions

Link-LR captures what goes through a LoRa channel and puts frames on air, to develop, test and validate LoRa equipment and networks (P2P, Meshtastic, LoRaWAN), from the bench to range tests in the field.

Link-LR outdoors, showing the Stats screen
Link-LR outdoors, showing the Stats screen

It runs on its own, on battery with its touch screen, or connected to a PC, where Link Studio drives it, reads its recordings and decodes them.

Link Studio: a session recorded by Link-LR, one frame selected with its details
Link Studio: a session recorded by Link-LR, one frame selected with its details

Measure, transmit, record

Stats screen: a 28-minute session, 72 receptions sorted by SNR margin, 14 errors
Stats screen: a 28-minute session, 72 receptions sorted by SNR margin, 14 errors
Log screen: frames with time, interval, length, RSSI and SNR colored by margin
Log screen: frames with time, interval, length, RSSI and SNR colored by margin

Stats - The current session in figures, frames sorted by margin.

Frame detail - The measurements taken on the frame, and its data.

Log - Every reception as a row: time, interval, length, RSSI, and the SNR colored by link margin. Errors get their own row too: CRC, header, incomplete frame.

Transmit - Frames sent from the device: any payload, or a received frame replayed.

Recording - Always on: everything received and sent is kept.

Specifications

Frequencies: 868 MHz (EU) / 915 MHz (US)

Antenna: External SMA

Display: 2.8" capacitive touch / 320 × 240 px

Battery: 18650 Li-ion, 2250 mAh, replaceable

USB: USB-C, charging and data

Enclosure: 100 x 90 x 30 mm (without antenna)

Inside, cover off: the base board with the ESP32-S3, the LoRa module plugged on top
Inside, cover off: the base board with the ESP32-S3, the LoRa module plugged on top

Radio: SX1262 (Seeed Wio-SX1262 module), LoRa

Recording: Permanent (flash), 4 MB rotating

Settings: SF 5 to 12, bandwidth 62.5 to 500 kHz, coding rate 4/5 to 4/8, sync word, preamble, CRC, IQ, receiver gain

Transmit: −9 to +22 dBm, up to 255 bytes

Open source

Firmware

ESP-IDF, C

The firmware, hardware, app and protocol are published as open source.
Hardware
App
Protocol

KiCad schematics, enclosure

Link Studio

JSON commands, recording format

link

Availability

Link-LR

€249 excl. VAT

  • SMA antenna

  • Desktop app (Windows, Linux, macOS)

What's included

  • Link-LR

First batch in preparation. Sign up to hear when reservations open.

FAQ

Does it work with LoRaWAN or Meshtastic?

Link-LR works at the LoRa radio layer: it receives and sends frames with the settings you choose, whatever the network above. It is not a LoRaWAN gateway and does not join a network.

Which bands?

862 to 930 MHz: EU868 and US915. No 433 or 169 MHz: the radio path is built for 868/915.

Semtronik